Sick KT6W-2N5116 Description 3-color RGB LED technology 2-point teach-in (mark and background) Tough, metal housing Automatic gloss adjustment for highly reflective materials 10 mm sensing distance Light exits at end or side, based on model Common mounting footprint Your benefits 3-color RGB LED for all registration mark applications - one sensor fits all Tough, metal housing for long service life Reliable operation, even with high-gloss reflective and jittering materials Easy setup - detect all marks with one sensor Features Dimensions (L x W x H): 80 mm x 30.4 mm x 53 mm Sensing distance: 10 mm Sensing distance tolerance: ± 3 mm Light source 1) 2): LED red, green, blue Light emission: Short side of housing Light spot size: 1.5 mm x 6.5 mm Light spot direction 3): Vertical Adjustment: Static 2-point teach-in 1) Average service life of 100,000 h at TA = +25 °C 2) Wave length: 470 nm, 525 nm, 640 nm 3) In relation to long side of housing Mechanics/electronics Supply voltage Vs: DC 10 V ... 30 V Residual ripple 1): ≤ 5 Vpp Power consumption 2): < 40 mA Switching frequency 3): 5 kHz Response time: 100 μs Switching output: NPN: HIGH = approx. VS / LOW ≤ 2 V Switching output: NPN Retention time (ET): 25 ms, non-volatile memory Connection type: Connector M12, 4-pin Protection class 4): II Circuit protection: Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected Enclosure rating: IP 67 Weight: Ca. 400 g Housing material: Die-cast zinc Output current Imax.: 100 mA 1) May not exceed or fall short of VS tolerances 2) Without load 3) With light/dark ratio 1:1 4) Reference voltage 50 V DC Limit values: operation in short-circuit protected network max. 8 A Ambient data Ambient temperature: Operation: -10 ... 55 °C Storage: -25 ... 75 °C Shock load: according to IEC 60068